English
Español
For glazed tiles, the glaze layer of the brick surface is a very dense substance. The colored liquid or dirty matter does not penetrate into the brick body. The contamination of the brick surface is smeared with water or the guest tile cleaning agent. Wipe the brick surface to remove the dirt on the brick surface. If it is a bumpy tile, if there is a lot of dust in the crack, use a brush, or use the KL100 porcelain Jiebao in the guest wood tile cleaning agent series. Rinse with water to remove dirt from the brick surface.
For glazed tiles, the common contaminants used in the home can be cleaned using the following cleaning agents:
1. Daily cleaning of glazed tiles
Cleaning method: You can use the mop and then use the customer to clean it.
2, glazed brick food stain pollution
Cleaning method: For tea, ice cream, coffee stains, beer and other stains can be cleaned with Kelin KL100 Porcelain Jiebao.
3. Contamination, rust and mortar pollution on glazed tiles
Cleaning method: rust can use KL308 rust remover in the guest wood tile cleaning agent series. The lime cement slurry is dripped on the brick surface, and the KL201B concrete thin layer cleaning agent (cement mortar cleaning agent) can be used.
4, glazed brick paint, drawing pen pollution
Cleaning method: Kelin KL810 environmentally friendly paint remover can be used, and the toothpaste used in the home also has a good decontamination effect.
Folding maintenance
Use liquid to avoid waxing, liquid polishing wax or crystal surface treatment.
Usually use electrostatic attractant with dust collector for maintenance.
Previous: Basic introduction of recycled shingles
Next: Tips for glazed tiles
